Blog Hunter

Hunter ceiling fan troubleshooting – the complete guide

Hunter ceiling fan troubleshooting

Hunter ceiling fan gives a convenient and cost-effective way to keep your place cool. You will use it if you do not have an air conditioner. It has the ability to provide both cold as well as hot air and maintain the ideal temperature for the room.

But with all of its advantages, it is an electronic unit that can break down and fails to function properly. If you are facing problems with the ceiling fan, follow these steps for Hunter ceiling fan troubleshooting and tips to find out the problem and fix it.

Hunter ceiling fans issues can range from clicking noise to the fan is not working on all speeds and fails to power up. At times, the fan stops working due to an overheating issue or because of an internal defect like shot ball bearings.

However, unless you find out the main problem of the fan, you will not be able to troubleshoot it properly. Here are some of the most common problems that your hunter ceiling fan can create and how to fix them.

The ceiling fan blades are wobbling

If the hunter ceiling fan is wobbly:

  • First of all, try to tighten the screw of blades using a screwdriver
  • Secondly, examine if the fan’s hanger ball is in good order or well-seated in the canopy

If the wobbling of fan is too much while running, consider installing a balancing kit. Usually, the kit has the full packaging during purchase, it also has a user manual. Follow the instructions from the manual to install it.

The fan light doesn’t work

If the hunter fan light stopped working after a power outage, the problem can be a blow fuse or a faulty light kit. In this case, you need to replace them.

The fan light can also stop working due to a faulty remote control, it can be the handset itself or the receiver. Try to fix the problem by making sure both the handset and the receiver are on the same frequency.

A broken light kit can be another reason. Incorrect installation can also stop hunter fan light working. You can fix both of these issues by replacing the light switch and installing the lights correctly.

Hunter ceiling fan overheats while in use

The advantage of using hunter ceiling fans is that they can work fine for years. Therefore, they do not overheat. You only have to turn it off in order to clean it on a regular basis. But it is an electric item, heating can be a sign of the work done on the product. More work creates more heat.

The fan can overheat if you use it on high speeds. In this case, you can reduce the speed reduce the heat. If the blades are not moving easily, it will also result in overheating. Motor failure can be another reason of this problem. The ideal approach is to contact a professional to solve or fix this problem.

Troubleshooting a ceiling fan that makes noises

If you notice the hunter ceiling fan is making noise such as grinding noise or any other noise, here is what you can do to avoid it:

  • Firstly, check whether some screws are loosely tight, if they are loose, tighten them
  • Check the blades, if you have cracked blades, replace them
  • If the fan is old, the motor laminates could be breaking down
  • The light fixture glass may not be secure and their screws need tightening so tight them

In addition, check to make sure that the blades are moving freely. It is beneficial to do Hunter ceiling fan repairs after the hunter fan runs for at least 6-12 months.

How to reset a Hunter ceiling fan

If you want to reset a Hunter ceiling fan, follow these steps:

  • Firstly, press and hold the power button on your remote for about five seconds
  • Secondly, wait for LED lights to blink
  • Thirdly, wait for 30 seconds after the blink and press any button
  • Lastly, you will hear a beeping sound and the lights will blink continuously

When the LED stops blinking, it means that you have completed the reset. A reset is necessary if you have tried a number of solutions to fix the hunter fan not working problem.

Final Words

If the Hunter fan won’t turn off while using a remote control, the problem can be the dip switches or the batteries in the remote and fan is not on the same frequency. When the fan creates a grinding noise, make sure that the blades are moving easily. In case you have motor problems or other issues that this hunter ceiling fan troubleshooting guide doesn’t cover, contact a professional/technician for further guidance and assistance.

Related Articles

How to troubleshoot a Hampton Bay ceiling fan

Harbor Breeze ceiling fan remote not working

About the author


1 Comment

  • My hunter fan, no light, has been running for years…sometimes all day and night.
    The other night it was on and I happened to look up and inside was a spark of electric light lasting only a second. It has not repeated. However I am concerned avoid using it all night when I am sleeping.

Leave a Comment